PARK P18LH 'Little Rock' - 18w Head

Artno: 621868

Beskrivning

Specifikation

The Park Little Rock with the Colby ‘Auto Bias Feature’ is based on the late ‘plexi’ Parks ( P50M and the Original Park Master Volume ) with an additional feature of being able to cascade the channels in series for additional Gain. Capable of beautiful, sparkling clean tones, overdriven Blues - from a hint of overdrive to full-on overdrive, and classic rock tones… and now a whole lot more!

User selectable output tubes include 6V6, 6L6 and standard El34 (classic ‘British’ tone- more mids and smoother overdrive) allow for changes in tone, feel and power without Biasing.

Cascade the channels in series (one into the other), for more Gain. A Punch switch - gives you a boost in the upper mids for a more aggressive sound. With both switches off the amp acts like a traditional four input, two channel Park P50 (1968 plexi) but at lower power levels. With the switches on its a higher gain, ‘hot rodded’ version of a 50 watt Jim Marshall plexi circuit. Be Careful - studio time is expensive and this amp is serious fun!!

    • Switchable rectifier - Tube or Diodes - for varied power and feel.
    • Power range from 15 to 23 watts (clean) depending on choice of rectifier and power tubes.
    • 2 Channel / 4 Input - allows for individual and blended use of the channels.
    • Channel cascade switch for additional gain
    • Featuring full sized Park transformers and choke the Park Little Rock was purpose built to produce a huge variety of Park tonal options at low volumes but with full uncompromised tone.


    The Park Little Rock exceeds your expectations of what a lower wattage amp can sonically produce - Mitch Colby has done it again!


    • Purpose-built professional 18 Watt Head for studio and small venue use based on the early to mid 70’s Jim Marshall Park circuits.
    • Full sized power, output transformers and choke as its Park big brothers (P50M and Park Master Volume) for full-bodied sound and no compromise in low end.
    • User selectable output tubes include 6V6, 6L6 and EL34 for changes in tone, feel and power without biasing. (EL34 Standard - classic British Tone).

    Wattage: 18W

    Channels: 2

    Inputs: Channel 1 High, Channel 1 Low, Channel 2 High, Channel 2 Low

    Output: 2 x 1/4" Speaker Out

    Impedance: Switchable using Impedance Selector on the rear panel — 4 Ω, 8 Ω, or 16 Ω

    Preamp Valves: 3 x 12AX7

    Output Valves: 2 x EL34

    Controls:

    Channel 1 Volume, Channel 2 Volume

    Switchable rectifier - Tube or Diodes

    3-Band EQ shared by both channels — Bass, Treble, Middle

    Brightness (Presence) shared by both channels

    Vår hemsida använder sig av cookies. Genom att fortsätta surfa på sidan godkänner du att vi använder cookies. Klicka här för mer information.

    Jag förstår